Sunday, September 16, 2007

FEBMOMMY

This blog is dedicated to all my FEBMOMMY patterns... I have now transferred them all to this site so I don't have to worry about the page being over done at yahoo/geocities so please bookmark this site so you have it... I am going to do some changes to the sites but I wanted to add the patterns here....

Lilo and Stitch (Lilo's top)




bead placemnt picture

Sydney's Lilo top from Lilo and Stitch movie
aug 2002

Need:
Red worsted weight yarn
contrasting felt
6x9 mm pony beads several
H hook

Row 1: Ch 60, dc in 4th chain from hook and in each chain across. (58 dc)

Row 2: Ch 2, turn. Dc in same stitch. * skip 2 chains, 3 dc in next stitch, * across to last stitch. Dc in last stitch. (ch 2 doesn't count as first st. (56 dc = 18 shells +2 dc's)

Row 3: Ch 2, turn. Dc in same stitch, dc in first space, dc in each dc across but also do a dc in the space before last dc too. (58 dc).

Row 4: Ch 2, turn. Dc in same stitch, dc in each across. (58 dc)

Row 5: Rep row 2.

Row 6: Rep row 3.

Row 7: Ch 1, turn, sc in same stitch, * ch 2, sc in next stitch, * across, sc in last stitch, fasten off. weave in ends.

Finishing:
cut 6 strands of Red yarn to use for ties mine are 24" long. Fold first tie in half in first corner pull the loop thru and put the ends in and pull tight, this should make 2 ties in the corner, do for the other 3 corners.

Fold the top in half to get the center. you will do the ties in sc's to each side of the center.

so now you have 6 areas and 12 strings for beads.

Beads:
add as many beads per string as you like but make them equal on the strings. In the picture I used green and purple..Sydney's favorite colors and it went with her grass skirt and leis. The beads are for decoration and weight on the strings. I have a picture of the center top bead placement I did.

To make the top, for the kids to wear, you add felt to the inside. I did mine in contrasting felt to show the stitching. You can make it washable by sewing the felt on. Mine was hot glued to the top, but you can even use fabric glue. Hope you like it.

Octopus Cat Toy


Jan 2004
Need:
worsted weight yarn and G hook or sport weight yarn and B-1 hook (the smaller one will make a smaller octopus.)
2" circle of plastic canvas, I used a 3" and cut 3 hole rows around and cut the center cross out for adding things to the toy.
needle to sew it up
stuffing for the head, (can be extra yarn pieces, catnip in a cloth, stuffing for toys, jingle bells)
I am using catnip spray for this toy but you can add it inside the toy.

To make it a toy with a helpful hand to make it move, I would use a yarn string, a washer to secure it inside the head, and a stick to make it one that can be like the feathers in the store...Will show a picture of that one soon.

Directions:
Ch 5, slip stitch to first ch to form ring.

Rnd 1: Ch 3, 11 dc in ring. Slip stitch to 3rd ch of beg ch 3. (fisrt ch 3 is first dc) (12 dc)

Rnd 2: Ch 3, dc in same st, 2 dc in each stitch around. Slip stitch to top of ch 3. (24 dc).

Rnd 3: Ch 3, dc in same stitch, * dc in next st, 2 dc in next st, * rep around, slip stitch to top of ch 3. (36 dc).

Rnd 4: Ch 3, dc in next stitch and around, slip stitch to top of ch 3. (36 dc).

Rnd 5: Ch 3, dc in same stitch, dc in next 8 sts, * 2dc in next st, dc in next 8 sts, * rep around, slip stich to top of ch 3. (40 dc).

Rnd 6: Rep Round 4. (40 dc).

Finish off but leave enough tail to sew it around plastic canvas circle, If you want to add jingle bells, or catnip in cloth do so before finishing off. Once the catnip wears off(if you put it in) you can spray lightly with cat nip spray. once sewed together, weave in ends.

Rnd 7: Attach yarn to the post of any dc in rnd 6, ch 1, sc around post, and around each post. slip stitch to first sc. (40 sc).

Rnd 8: ch 1, sc in same st, 3 dc dec in next 3 sts, ch 27, sc in second ch from hook to last ch.(first leg), * sc in next 2 sts, 3 dc dec in next 3 sts, ch 27, sc in 2nd ch from hook to last ch, * around, (last one will be 1 sc and slip stitch to first sc. Finish off and weave in ends...

I added the stuffing at the end and used a hook to push it thru the hole at the bottom of the circle...This toy can be washed, but I would not dry with heat in the dryer, I would have it on fluff, because of the plastic canvas in it...and if you make it for someone as a gift, please add my website to the card and please let them know about the cat nip spray and about the dryer as it will melt from the heat.

Hunter's Warm and Comfy Scarf

Pic coming soon!

Hunter's warm and comfy scarf
June 2002

Need:
Worsted weight yarn
K hook

fpdc: (front post double crochet): yarn over, insert hook around post of next stitch, from right to left, yarn over and complete as a usual dc.
(left to right for lefties)

Row 1: Ch 36, sc in second stitch from hook till end. Ch 2, turn. (35 sc)

Row 2: (the ch 2 above is hdsc now and throughout); *Fpdc arond next sc, dc in next sc, * repeat till end, hdc in last st. Ch 2, turn.

Row 3: *dc in fpdc, fpdc in next dc,*rep till last st. Hdc in last st. ch 2, turn.

Row 4: *fpdc in dc, dc in fpdc, * repeat till the end, hdc in last st. ch 2, turn.

Rep rows 3 and 4 till you have the length you want, I added frindges to the short ends.
When you get the length you want, do a sc row at the end and fasten off.

One of my husband's students, loved Hunter's scarf and we gave it to him and I didn't get a picture of it first.

Hunter's Square


Hunter's square/washcloth...
December 2003

I made the example out of worsted cotton as a washcloth but you can make a square for exchanges out of worsted weight yarn.
It came out to 5 1/2" for me but I crochet very tightly, so it may be a 6" square for someone who crochets loosely.

Ch 5, slip stitch to form ring.

Rnd 1: Ch 3, 11 dc in ring. Slip stitch to top of ch 3. (12 dc).

Rnd 2: Slip stitch to space between 2 dc's, ch 4, *dc in next space, ch 1, * around. Slip stitch to 3rd ch of beg ch 4. (12 dc, 12 ch 1 spaces)

Rnd 3: Slip stitch to ch 1 space, ch 6, dc in same st (makes first corner), ch 1, (dc,ch 1, dc, ch 1)in next space 2 times, (dc, ch 3, dc) in next space(2nd corner), * ch 1, (dc, ch 1, dc, ch 1)in next space 2 times, (dc, ch 3, dc) in next corner, rep * around. Slip stitch to 3rd ch of beg ch 6.

(in this next round, skip the dc's that make up the corners)
Rnd 4: Slip stitch into corner space, (ch 3, dc, ch 2, 2 dc) in corner space, (ch 1, dc in next dc) 4 times, ch 1, (2 dc, ch 2, 2 dc)in next corner, *(ch 1, dc in next dc) 4 times, ch 1, (2 dc, ch 2, 2 dc)in next corner, rep * around. Slip stitch to 3rd ch of beg ch 3.

Rnd 5: Ch 4, tr in next dc, (tr, ch 3, tr) in corner space,skip next space, ch 2, tr in next space, (ch 1, tr in next space) 2 times, ch 2, tr in next 2 dc, (tr, ch 3, tr) in corner space, tr in next 2 dc, * skip next space, ch 2, tr in next space, (ch 1, tr in next space)2 times, ch 2, tr in next 2 dc, (tr, ch 3, tr) in corner space, rep * around. Slip stitch to 4th ch of beg ch 4.

Rnd 6: Ch 1, sc in same space, sc in next tr, hdc in next tr, (2 sc, ch 2, 2 sc) in corner space, hdc in next tr, sc in next 2 tr, 2 sc in ch 2 space, sc in each tr and ch 1 space and 2 sc in the ch 2 space, sc in next 2 tr, hdc in next tr, (2 sc, ch 2, 2 sc)in corner space, *hdc on next tr, sc in next 2 tr, 2 sc in ch 2 space, sc in each of the tr and ch 1 spaces till ch 2 space and do 2 sc in it, sc in next 2 tr, hdc in next tr, (2 sc, ch 2, 2 sc) in next corner, rep * around. Slip Stitch in first sc.

Finish off and weave in ends.

Cobweb Duster


aug 2002
Need:
small amount of worsted weight yarn
crochet hook size H
and a latch hook (but can do without it if don't have one)

The duster ties to the end of a mop or broom handle.

Ch 5, join to form ring.

Rnd 1: Ch 1, 10 sc in ring. Join to first sc with a slip stitch.(10 sc)

Rnd 2: Ch 2, sc in same stitch, 2 sc in each sc around. Join with a slip stitch to the top of the ch 2. (20sc) The ch 2 is the first sc.

Rnd 3: Ch 2, dc around. Slip stitch to the top of the ch 2. (ch 2 is the first dc here).

Rnds 4-8: Rep round 3.

Rnd 9: Ch 2, hdc around. (ch 2 is the first hdc here) slip stitch to the top of the ch 2.

Rnd 10: Ch 2, dc around. slip stitch to the top of ch 2.

Rnds 11-14: Ch 1, sc around, slip stitch to the first sc.

Rnd 15: Ch 2, hdc around. Slip stitch to the top of the ch 2.

Rnd 16: Ch 1, sc around. slip stitch to first sc. Fasten off.

Finishing directions: cut some yarn in 4"lengths. You will latch hook them to the top rounds of the duster...You can do as many or as little as you want...In the example, I did about 4-5 rows on the duster..
If you don't know how to latch hook, you can tie the yarn to the duster and knot it on.

then cut a yarn about double the circumference of the duster and weave it thru Rnd 15. This will be the tie to hold it on the pole.

you could put some fabric glue on the inside to keep the yarn that is ties or latch hooked on the duster to wash the dust and cobbies away...but you can rinse it off and let dry too.

Hope you like it.

Octopus Scrubby




by: Bren G.
August 2003

Special stitch:
dc dec: dc in first dc till 1 loop left dc into next dc till 3 loops left go thru all 3. you have made 2 sts to 1.

Need:
nylon scrubbie (found at most grocery stores, Wal-mart, Kmart, even some dollar stores)
contrasting worsted weight cotton yarn
size g hook.


Round 1: Slip stitch cotton yarn to nylon scrubby, ch 1, and do 40 sc evenly around the circle. slip stitch to first sc. (40 sc)

Round 2: Ch 3, dc in next st and around, slip stitch to top of ch 3. (40 sts). it will start to cup around, you want it to...

Round 3: Ch 2, dc in next st(first dc dec), dc in next 3 dc,* dc dec, dc in next 3 dc,, * around..slip stitch to top of first dc dec. (32 sts) ( it makes 8 dc dec, and 25 reg dc)

Round 4: Ch 1, sc in same st, and each stitch around. slip stitch to first sc.(32 sts)

Round 5: Ch 1, sc in same st, sc in next sc, ch 20(first leg)sc in second stitch from hook and last ch, sc in next 4 sc in loop, * ch 20, sc in second chain from hook till last ch, sc in next 4 sc, * around till last. it will be only 2 sc and slip stitch to first sc.

Fasten off and weave in ends. Enjoy.

My Scrubby


My scrubby pattern
may 2002



need:
cotton yarn 1 ball
Round plastic scrubby pad
crochet hook size G

V-st (dc, ch 1, dc ) in same stitch

Round 1: attach yarn to scrubby, ch 1 and do 32 sc evenly around. join with slip stitch to first sc. (32 sc).

Round 2: Ch 3, (counts as first dc now and throughout), dc in same stitch, dc in next 7 sc, (2 dc, ch 2, 2dc) in next stitch, dc in next 7 sc, (2dc, ch 2, 2dc) in next stitch, dc in next 7 sc, (2dc, ch 2, 2dc) in next st, dc in next 7 sc, 2dc in same stitch as first dc, ch 1, sc in first dc to form space.

Now you will be working on two sides, so you will be going from 1 space to the middle space then to the last space...

Round 3: Ch 3, turn, dc in space, ch 2, skip 2 dc, *3 dc in next dc, ch 2, skip 2 dc; rep from*across to middle. (2dc, ch 2) twice, skip 2 dc, ** 3 dc in next dc, ch 2, skip 2 dc,rep from ** to corner, in corner space, 2 dc.

Round 4: Ch 3 turn, dc in next stitch, ch 2, dc in each if the next 3 dc, ch 2, dc in next 3 dc, ch 2, dc in next 3 dc, ch 2, (2dc, ch2) twice in center space, skip 2 dc, dc in next 3 dc, ch 2, dc in next 3 dc, ch 2, dc n next 3 dc, ch 2 dc in last 2 dc.

Round 5: Ch 3, turn. dc in next stitch, V-st in next space, dc in next 3 dc, V-st in space, dc in next 3 dc, V-st in space,dc in next 3dc, V-st in space, dc in next 2 dc,(dc, ch 2, dc)in center space, dc in next 2 dc, V-st in space, dc in next 3 dc, V-st in space, dc in next 3 dc, V-st in space, dc in next 3 dc, V-st in space, dc in last 2 dc.

Round 6: Ch 3, turn, dc in next 2 dc, ch 1, dc in next 5 dc, * ch 1, dc in next 5 dc, rep * til center sp((the dc's around space will be 4 instead of 5))in center(dc, ch 2, dc), dc in next 4 dc, * ch 1, dc in next 5 dc, rep to end, in end, dc in last 3 dc.

Round 7: Ch 3, turn, dc n each dc and space to center space (dc, ch 2, dc), dc in each space and dc to end.

Rep rounds 3-6 once more to pattern...

Round 8 note:
in the end area, it will be dc in each dc, not in space...

Round Coaster


My Round Coaster
Feb 2002





Need:
cotton worsted weight yarn
size g hook

Ch 5, join to form ring.

Rnd 1: Ch 3, 15 dc in ring. slip stitch to 3rd ch of beg ch 3. ( 16 sts)

Rnd 2: Slip stitch to space between next dc. Ch 4, (counts as dc and ch 1), dc, ch 1 in each space around. Slip stitch to 3rd ch of beg ch 4. ( 16 dc and ch 1 spaces)

Rnd 3: slip stitch in next ch 1 space, Ch 5, dc in same space( counts as first V st), (dc,ch 2,dc) in each ch 1 space around.slip stitch in 3rd ch of beg ch 5 space.( 16 V sts)

Rnd 4: slip stitch in space of V stitch,ch 3, 2 dc in same space,ch 2, (3dc in next space, ch 2 ) around.slip stitch in 3rd ch of beg ch 3.

fasten off and weave in ends.

Square Coaster


My Square coaster
By: Brenda G.
Feb 2002




Need:
some cotton yarn and G hook

Ch 5, join to form ring.

Rnd 1: Ch 3, 11 dc in ring. join with 3rd ch of beg ch 3. (12 dcs)

Rnd 2: slip stich to the SPACE between dcs. Ch 4, (equals dc and ch 1) dc, ch 1 in each space around. Join to 3rd ch of beg ch 4.(12 dcs and ch 1 spaces)

Rnd 3: slip stitch in next space, Ch 3, dc, ch 2, 2 dc in same space, (ch 1, dc in next space) 2 times. ch 1, (2dc, ch 2 2dc) in next space. (Ch 1, dc in space) 2 times. ch 1, (2dc, ch 2, 2dc) in next space, (ch 1, dc in space) 2 times. ch 1, ( 2dc, ch 2, 2dc) in next space (ch 1, dc in space) 2 times. Ch 1, slip stitch in 3rd ch of beg ch 3.

Rnd 4: slip stitch to ch 2 space.(ch 3, dc, ch2, 2dc) in same space, (ch 1, dc in next space) 3 times, ch 1, (2 dc, ch 2, 2dc) in next space. (ch 1, dc in next space) 3 times, ch 1,(2dc, ch 2, 2dc) in next space.(ch 1, dc in next space) 3 times, ch 1, slip stitch in 3rd ch of beg ch 3.

Fasten off here or you can cont. and make it bigger..

Flower Coaster


August 2003



need: worsted weight cotton
size G or H hook

pattern notes:
V-st = (dc, ch 2, dc) for this pattern

I try to design patterns that do not have a gauge. It should be the size of a regular coaster.

Ch 5, slip stitch to first chain to form ring.

Rnd 1: Ch 3, (counts as first dc, now and thru out), dc in ring, ch 3, * (2dc, ch 3) rep * 3 more times, slip stitch to the top of ch 3. 5(2dc) groups.

Rnd 2: Slip stitch into the space between 2dc, ch 5, dc in same space(first V-st), (V-st, ch 3, V-st) in ch 3 space, skip nxt dc, * in spaces between 2 dc, V-st, in ch 3 spaces,(V-st, ch 3, V-st), * around. Slip stitch to the 3rd chain of beg ch 5.

Rnd 3: Slip stitch into ch 2 of V-st, ch 1, sc in space, ch 3, sc in space of next V-st, in ch 3 space between the 2 v-st, (sc, ch 3, sc), sc in next V-st, ch 3, *sc in next V-st, ch 3, in ch 3 space between the 2 V-st,(sc, ch 3, sc), follow* around, after last sc, ch 3, slip stitch in first sc.

Rnd 4: Ch 3, V-st in ch 3 space, dc in each of the next 2 sc, * dc in each of the sc, and V-st in chain 3 spaces around. Slip stitch to top of ch 3. Fasten off and weave in ends. Hope you enjoy your coaster.